Total Videos 1242

Search | - (making a jewelers anvil and a coin ring)

0:00

Making a Jewelers Anvil and a Coin Ring

Garage workshop

In this video I make a jewelers anvil from a piece of round stock cutoff of mild steel which I found on the scrapyard. It is 26mm thick or roughly one inch.

0:00

Making a ring from 50 cent coin

Odd Tinkering

This week I wanted to try something different, making a ring from 50 cent coin.This is a really simple DIY project that could be done with quite minimal tools.

0:00

Making Metallick Ring With Thorns Very Sharp Spikes From a Nut

Today i made a metal ring from the nut If you have any good ideas, please comment below I will try to make videos for you to see. More video: Making A Mini M9 ...

0:00

MAKING A FORGED STEEL RING!!!

Alec Steele

http://alecsteeleblacksmith.com SUBSCRIBE FOR MORE DAILY BLACKSMITHING!! GET T-SHIRTS: http://alecsteeleshop.com/ FOLLOW ON INSTAGRAM: ...

0:00

Making a Coin Bell from two half dollars

Check out my website for my coin rings! www.changeyoucanwear.net coin ring tools www.jasons.works Disclaimer: This content is exclusively managed by ...

0:00

Metalworking and Blacksmithing - Coin Rings

Make N' Create

I've wanted to try this for while now and even though the rings turned out pretty nice, making them was really boring.... Oh well. Thanks for Watching!

0:00

Ring making jig

Gary Huston

A quick jig to make rings for a job I'm working on. Can be adapted to make rings of varying sizes.

0:00

Making a Jewelers Anvil

SCOTTISH MAKER

today I make a jewellers anvil for making coin ring.

0:00

How to Make a Ring from a Nut

Andrew W

In this video learn how to make a ring from a steel nut. With a little bit of elbow grease, some time and minimal tools you can make this super cool ring. Here is a ...

0:00

Silver coin rings from German 5 Mark. Making process (how I made coin rings)

Coin Rings Studio

Recently I made two rings for my buyer. Rings was made from German silver coins 5 Mark 1977 and 1973, years.Rings turned out just gorgeous! Even better ...

0:00

Making An Anvil From Bar Stock

Making an anvil from 1 inch thick mild steel bar stock. I went to the local steel supply shop and asked for the thickest bar stock that they had. They had 1 inch ...

Play All

انگشتر سازی

Jahanpour 30

0:00

Making a Small Anvil -How to Make an Anvil from I-beam

In this video, I show you how I made a small anvil from I-beam. Anvils of this size are terrific as a jewelers anvil. A larger version could be made too... you'd just ...

0:00

I TURN 2 HEX NUTS into a 1 Ct DIAMOND RING

Pablo Cimadevila

Thank you for 12:12 min of your time. My work on Instagram ▻https://www.instagram.com/pablocimadevila Music in my videos ▻https://goo.gl/iJK1R1 Best ...

0:00

Forging Tricks at the Anvil with Nile Fahmy

Creative Side instructor, Nile Fahmy, shows a couple of professional tips that make forging with your anvil just a bit more simple.

0:00

Making a Ring from a 50 Cent Coin

Christoph Wagner

Description ============== Making modern looking rings out of 50 cent coins and some scrap mahogany wood. I used my DIY CNC machine to manufacture ...

0:00

10 Must Have Jewelry Tools. Without these tools I couldn't make any of my work.

GomeowCreations

If you would like to send any materials, tool or anything really free to send them to my PO box and I will make sure to give you a shout out and use them in a ...

0:00

coin ring from £1

Sp4rt4nR17

this is the process I took to turn a 1983 British pound coin in a custom made ring. due to the wear and tear of the ring it wasn't fit as a form of payment, even ...

0:00

Making a Twist Forged Bracelet with the Fretz Jeweler's Sledge Hammer

Rio Grande

http://www.riogrande.com Bill Fretz shows how to make a twist forged bracelet with his Fretz Jeweler's Sledge Hammer. Designed by Bill Fretz, the jeweler's ...

Play All

Forging and anvil making

Franken Stein